A grey modified acrylic primer based upon a speciality resin designed primarily to key onto non-ferrous metals, and to provide a tough, durable coating suitable for subsequent application of the HYCOTE range of standard gloss, satin and matt finishes, and matched colour paints.
Where to use
On non-ferrous metals including galvanised, anodised and zinc coated steel, aluminium
Where not to use
• Not recommended for use on copper or brass
• Excellent covering power
• Excellent adhesion to most non-ferrous surfaces.
• Suitable for use on many rigid plastics including glass reinforced polyester [See Section 6].
• Suitable for use on fully cured and aged paint finishes
Prepare the area to be treated, ensuring freedom from dust, grime, greases, oils etc, using a detergent solution followed by rinsing thoroughly and drying. Any corrosion, other surface contamination, and loosely adhering matter should be removed with an appropriate grade of wet and dry abrasive cloth. Following preparation the surfaces should be further treated with a solvent wipe using HYCOTE BRAKE CLEANER, [XUK302], white spirit, or thinners and allowed to dry.
If in doubt about the composition of the substrate, undertake a small test application on an inconspicuous area prior to use to ensure suitability.