Description

Touchscreen Nitrile Grip Gloves a high visibility knitted glove for precision work in dry-to moist environments. Flexible and soft with touchscreen functionality ensuring seamless transition between duties without having to remove the glove. Touchscreen Nitrile Grip Gloves with yellow Nitrile dots in the palm for ultimate grip. Made of 15 gg fibre to ensure all-day comfort. Retail packs are delivered with descriptive hangtags to help customers with their in-store choice.

• EN388 4131X
• EN407 X1XXXX
• Withstands contact heat up to 100°c
• Touchscreen
• latex-free
• high visibility colour
• water and oil repellent palm

ABRASION RESISTANCE:

The material is subjected to abrasion by a sandpaper under a determined pressure. The protection level is indicated on a scale of 1 to 4 depending on the number of turns required until a hole appears in the material. The higher the number is, the better the resistance to abrasion.

CUT RESISTANCE, COUP TEST:

The cut protection is tested. A knife is passed over the glove material until it cuts through. The protection level is given by a number between 1 and 5, where 5 indicates the highest cut protection. If the material dulls the knife during this test, the cut test ISO 13997(TDM test) shall be performed instead, see point 5.

TEARING STRENGTH:

The force required to tear the glove material apart is measured. The protection level is indicated by a number between 1 and 4, where 4 indicates the strongest material.

PUNCTURE RESISTANCE:

Based on the amount of force required to puncture the material with a tip. The protection function is indicated by a number between 1 and 4, where 4 indicates the strongest material.

CUT RESISTANCE, TDM TEST ISO 13997:

If the knife gets dull during the coup test, see point 2, this test shall be performed instead. The result is given by a letter, A to F, where F indicates the highest level of protection. If any of these letters is given, this method determines the protection level instead of the coup test.

ISO 13997:1999 – Determination of resistance to cutting by sharp objects
An alternative cut test recommended for cut protection gloves. Shall be used in EN388:2016 for cut protection gloves where the cut material dulls the cutting knife during testing. A knife cuts with constant speed but increasing force until breakthrough of the cut protection material. Level of protection is given in Newton, the force needed for cut through at 20mm cut length.